30 Passengers plus luggage, plus pilot and one crew.
|
| |
Two Diesel 6 cylinders 3.2 Litre turbo charged inter cooled Steyr engine 175 kW output.
|
| |
600 litres Diesel. There are two lockable filling points on each side of the Hovercraft deck.
|
| |
2 x Tachometers (engine), 2 x Tachometers (lift fan), 2 x Oil pressure, 2 x Water temp, Voltmeter, fuel gauge, hour meters, key ignition switch.
|
| |
25/5 watts VHF radio, 8” LCD radar, GPS, remote searchlight, navigation lights (USCG approved), flashing orange light.
|
| |
USCG approved life jackets, flares, EPIRB, air horns, search light, windshield wipers, fixed headlights. First aid medical kit. 2 x 3 kg fire extinguishers (dry powder)
|
|
The deck of this Hovercraft is manufactured from fiberglass core sandwich technology. Using a blown rigid PVC foam core, this provides a high tensile strength and low weight.
Crane lugs to enable the Hovercraft to be lifted.
|
|
The Hull and super structure is manufactured using the latest techniques, incorporating rigid foam core sandwich, Kevlar/carbon fibre and E glass mat is vacuum bagged with an epoxy resin system. This method provides high tensile strength and extremely lightweight structures. Also offers a low radar signature. This structure will have a 20 year service life with minimal maintenance.
|
|
The Hovercraft has two doors on each side of the craft to provide easy access to the cabin of the Hovercraft. There is also a fold out gangway with railing to cater for non-scheduled stops at areas where there are no facilities in place.
|
|
600 Litres, mains pressure water pump.
|
At the front of the cabin there is a smaller locker provided designed to hold 60 cans and 30 sandwich packs. This compartment is cooled by the air conditioning.
|
Forward facing Fabric-upholstered seats, all window glass is laminated. Front windshield is tinted. Fan force cabin air conditioning and ventilation to each passenger seat. Fan controls at the helm station. Fresh air ventilation to cabin space also incorporated. Concealed roof strip light along the full length of the aisles.
|
| |
Luggage compartment of 4 cubic metres incorporated adjacent to the Toilet cubicle with access door from the outside of the Hovercraft. Hand luggage can be stowed in an aircraft style overhead locker.
|
| |
Aircraft style toilet cubicle with washbasin, mirror and cupboard, paper towel dispenser and rubbish container. 100 litre sewage tank. A deck fitting is provided to enable the sewage tank to be pumped out.
|
| |
Intercom system is fitted to enable the captain and the stewardess to communicate with the passengers. A CD player is fitted to enable background music to play over the intercom system.
|
| |
Two centrifugal fans provide the lift. The casing of which is manufactured from Kevlar/carbon fibre. The impeller and shaft is stainless steel. Hydraulic motors drive each fan. The speed of each fan can be varied also. A tachometer is fitted to each fan so that the speed can be monitored at the helm station.
|
| |
|
There are two 2.0 metersdiameter 6 bladed axial fans that provide the thrust for the Hovercraft. They are variable pitch but fixed in motion. The fan cowlings are made from Kevlar/carbon fibre. At the rear of the cowling are 4 air rudders that provide the steering for the Hovercraft. There are also 2 elevator rudders that provide some longitudinal control. The drive to the thrust fan is via a tooth belt.
|
|
The Hovercraft uses the latest in fly by wire technology. It is simple yet advanced. The steering controls allow the operator to position the craft precisely every time. The lift fan control allows the operator to adjust the fan speed according to the payload. The thrust fan speed can also be varied to cater for various sea and wind conditions. The instrumentation consists of twin Tachometers for the engine rpm. Twin tachometers for the lift fans. Water temp gauges, oil pressure gauges, fuel gauges, and hour meters for each engine. Dead man switch, ignition key start for each engine. There is a bank of switches for spotlights, siren, cabin lights, instrumentation lights, and fan cooling for cockpit.
|
| |
On board spare parts, alternator belt, water pump, skirt maintenance kit and tool kit.
|
| |
Two retractable trigger operated deck wash systems are fitted to each side of the Hovercraft. The mains pressure pump that is incorporated in the Hovercraft operates them.
|
| |
Bronze Colour
|
| |
Deck: Top deck surfaces Bronze, side panels White
|
| |
Overhead Luggage Compartment: Matt White
|
|
McConnell Brand Executive Seats with Centre Seat Arm Rest, Velcro Head rest protector, Reclining, and Mesh Seat Pocket on the backrest. Folding Footrest. Seat covering colour is as per the Brochure Commuter MkII Seat. Fabric Code YD/N23831.
|
|
The Hovercraft is fitted with a bag and finger skirt system. This provides the best performance and stability for a craft of this size. The material used has been developed and tested over many years, and the result is that we have a durable and flexible material that will perform well in the most adverse conditions.
|
|
Specifications: |
12 meters |
| 4 meters |
6 meters
4.080 meters |
0.75 meters |
1.9 meters |
2 meters to 3 meters |
28 knots max |
15 litres/hour to 30 litres/hour |
12 hours |
45 knots (in optimum conditions). |
Greater than 6%. |
|
4500 kilograms |
|
$ POA |
For further information please contact us using out Contacts sections, click here to be taken there now. |
